Removal And Installation: Removal
WARNING: This page is about a different car, the 2018 Jaguar XF, 2017 Jaguar XF, and 2016 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- For additional information, refer to: Battery Disconnect and Connect .
- For additional information, refer to: Cowl Vent Screen .
-
CAUTION: Before disconnecting or removing components, ensure the area around the joint faces and connections are clean. Plug open connections to prevent contamination.
Torque Specification: 3.5 Nm
Torque Specification: 4 Nm
-
CAUTION:
- Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
- If brake fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.
Torque Specification: 17 Nm
Torque Specification: 8 Nm
- Loosen but do not remove the 2 nuts.