Rear Drive HALFSHAFTS: Specifications
WARNING: This page is about a different car, the 2012 Land Rover Range Rover Sport and 2011 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
RECOMMENDED LUBRICANT
| Item | Specification |
| Outboard joint | Use grease supplied with replacement boot kit (Optimol MS139G) |
| Inboard joint | Use grease supplied with replacement boot kit (Thermax MS141G) |
GENERAL SPECIFICATION
| Item | Specification |
| Type | Fully floating, solid shafts incorporating plunging constant velocity joint at inboard end and fixed constant velocity joint at outboard end of shaft |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| * Lower arm to wheel knuckle nut | 275 | 203 |
| Toe link bolt | 175 | 129 |
| *+ Halfshaft nut | 420 | 311 |
| Road wheel nuts |
|
|
* New nut must be fitted
+ Stake nut on completion