LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Seating) >> Seating >> Removal And Installation >> Front Seat Backrest Cover >> Installation

Front Seat Backrest Cover: Installation

WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front sear backrest cover.
    • Install the hog rings.
    • Install the clips.
    • Attach the tension straps.
  2. Install the front seat lumbar adjustment knob.
    • Push firmly to secure to the lumbar mechanism.
  3. Install the seat armrest. See Front Seat Armrest . .
  4. Install the front seat head restraint.
  5. Install the front seat grab handles.
    • Tighten the bolts to 25 Nm (18 lb.ft).
    • Install the bolt covers.
  6. Install the front seat backrest assembly.
    • Tighten the Torx bolts to 25 Nm (18 lb.ft).
    • Connect and secure the electrical connectors.
  7. Install the front seat backrest hinge cover.
    • Tighten the screws.
    • Fit the clip.
  8. Install the front seat cushion side trim.
    • Position and secure in the clips.
    • Install the screws.
  9. Install the front safety belt buckle. Refer to Front Safety Belt Buckle article.
scientia non olet · About LEMON Manuals