LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2011 >> Range Rover Sport Autobiography >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Ride And Handling Optimization >> Ride And Handling Optimization >> Removal And Installation >> Dynamic Response Module >> Installation

Dynamic Response Module: Installation

  1. Install the dynamic response module.
    • Connect the electrical connectors.
    • Tighten the 2 bolts to 4 Nm (3 lb.ft).
  2. Install the closing trim panel.
    • Connect the electrical connector.
    • Secure the clip.
    • Tighten the screws.
  3. Install the cowl side trim panel. Refer to Cowl Side Trim Panel .
  4. Initiate a new control module using T4.
scientia non olet · About LEMON Manuals