DTC C0062-76: Longitudinal Acceleration Sensor - Wrong mounting position: Action
WARNING: This page is about a different car, the 2015 Land Rover LR2, 2014 Land Rover LR2, and 2013 Land Rover LR2. However, it is still accessible from the selected car via links, so may be relevant.
- Check for incorrectly mounted or loose longitudinal acceleration sensor and rectify as required. Clear DTC and retest
- If fault persists, carry out the longitudinal acceleration sensor calibration routine using the manufacturer approved diagnostic system. Clear DTC and retest
- If fault persists, check and install a new longitudinal acceleration sensor as required