Cable Setting Procedure

The correct cable adjustment is achieved by use of a yellow button in the selector lever arm eye end. The setting process is to ensure that the transmission is in Park (P) and the selector lever is in its detente park position. This can be checked by selecting the Park (P) position and with the park brake released, rocking the vehicle forward and back to ensure that the transmission parking pawl is engaged.

Once the cable is in the correct position, the yellow setting button can be engaged with the serrated portion of the cable. Access to the setting button is through the aperture in the upper face of the shift housing.

The cable should be reset whenever any part of the transmission shift system has been disturbed or replaced, including the transmission, operating arms, abutment brackets cables or selector lever assembly.