LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2009 >> LR2 >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission/Transaxle >> Automatic Transmission/Transaxle (Vehicles With: AWF21 6-Speed Automatic Transmission) >> Removal And Installation >> Transmission Control Module (TCM) 3.2L >> Installation

Transmission Control Module (TCM) 3.2L: Installation

  1. Install the TCM.

    Torque: 24 Nm

  2. Install the transmission selector lever.

    Torque: 13 Nm

  3. Secure and connect the selector lever cable.
  4. Install the support bracket.

    Torque: 25 Nm

  5. Install the A/C compressor mounting bracket. Refer to Accessory Drive Component Bracket .
  6. Connect the battery ground cable and install the cover. Refer to Specifications .
  7. If a new component has been installed, configure using Land Rover approved diagnostic equipment.