LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2008 >> Range Rover Sport LE >> Repair and Diagnosis >> Transmission >> Transfer Case >> Four-Wheel Drive Systems >> Four-Wheel Drive Systems >> Removal And Installation >> Four-Wheel Drive (4WD) Control Module >> Installation

Four-Wheel Drive (4WD) Control Module: Installation

  1. To install, reverse the removal procedure.
    1. Connect the Land Rover approved diagnostic equipment.
    2. Clear any Diagnostic Trouble Codes (DTCs).
    3. Start the diagnostic service function transfer case-transfer case replacement. 
    4. Clear any DTCs after calibration and check for correct operation.
scientia non olet · About LEMON Manuals