Rear Disc Brake: Specifications
WARNING: This page is about a different car, the 2006 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification |
| Disc type | Ventilated |
| Disc diameter | 350 mm (13.5 in) |
| Disc thickness: | |
| New | 20.0 mm (0.78 in) |
| Service limit | 17.0 mm (0.67 in) |
| Maximum disc run-out - disc installed | 0.09 mm (0.003 in) |
| Caliper type | Sliding pin, single piston |
| Piston diameter | 45.0 mm (1.7 in) |
| Pad minimum thickness | 3.0 mm (0.12 in) |
| Brake pad wear warning lead: | |
| Location | Rear right hand brake pad |
| Activates at | 75% of pad life utilized |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| Brake caliper bleed screw | 14 | 10 |
| Brake hose union | 32 | 24 |
| Brake disc retaining bolt | 16 | 12 |
| * Brake caliper anchor plate to hub bolts: | ||
| Stage 1 | 15 | 11 |
| Stage 2 | Further 60° | Further 60° |
| Brake caliper housing to anchor plate bolts | 35 | 26 |
* New bolts must be installed