LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2007 >> LR3 HSE >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio Unit >> Audio Unit >> Description And Operation >> Audio System >> Low Line Audio Head Unit >> Transit Mode

Transit Mode

Transit mode is used to reduce the vehicle battery current drain whilst the vehicle is being stored or transported. Transit mode is entered/exited via a CAN signal from T4. In transit mode the following circuits will be disabled:

In transit mode the CAN port and the ON/OFF switch are the only circuits that are left active.

The CAN port is left open to allow the EXIT from transit mode signal to be received. The ON/OFF switch is left active to allow feedback to the driver via the HU LCD, that the unit is in Transit mode should the driver attempt to power up the HU. This will only occur when the vehicle engine is running and the battery is above 12.3 Volts.

scientia non olet · About LEMON Manuals