Front Disc Brake: Specifications
WARNING: This page is about a different car, the 2009 Land Rover Range Rover, 2008 Land Rover Range Rover, and 2007 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification |
| Disc type | Ventilated |
| Disc diameter: | |
| Vehicles without Brembo brakes | 340 mm (13.5 in) |
| Vehicles with Brembo brakes | 360 mm (14.1 in) |
| Disc thickness: | |
| New | 30.0 mm (1.18 in) |
| Service limit | 27.0 mm (1.063 in) |
| Maximum disc run-out - disc installed | 0.05 mm (0.002 in) |
| Vehicles without Brembo brakes: | |
| Caliper type | Sliding pin, twin piston |
| Piston diameter | 48.0 mm (1.9 in) |
| Pad minimum thickness | 3.0 mm (0.12 in) |
| Vehicles with Brembo brakes: | |
| Caliper type | Fixed, opposing four piston |
| Piston diameter | 46 mm (1.8 in) |
| Pad minimum thickness | 3.0 mm (0.12 in) |
| Brake pad wear warning lead: | |
| Location | Front left hand brake pad |
| Activates at | 75% of pad life utilized |
TORQUE SPECIFICATIONS VEHICLES WITHOUT BREMBO BRAKES
| Description | Nm | lb-ft |
|---|---|---|
| Brake caliper bleed screw | 14 | 10 |
| Brake disc retaining bolt | 16 | 12 |
| * Brake caliper anchor plate to hub bolts: | ||
| Stage 1 | 65 | 48 |
| Stage 2 | Further 90° | Further 90° |
| Brake caliper housing to anchor plate bolts | 35 | 26 |
| Brake hose union | 32 | 24 |
* New bolts must be installed
TORQUE SPECIFICATIONS VEHICLES WITH BREMBO BRAKES
| Description | Nm | lb-ft |
|---|---|---|
| Brake caliper bleed screw | 19 | 14 |
| Brake disc retaining bolt | 16 | 12 |
| * Brake caliper retaining bolts: | ||
| Stage 1 | 65 | 48 |
| Stage 2 | Further 90° | Further 90° |
| Brake hose union | 32 | 24 |
* New bolts must be installed