LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2006 >> LR3 Base >> Repair and Diagnosis >> Transmission >> Transfer Case >> Four-Wheel Drive Systems >> Four-Wheel Drive Systems >> Removal And Installation >> High/Low Range Sensor >> Installation

High/Low Range Sensor: Installation

  1. To install, reverse the removal procedure.
    • Clean the components.
    • Tighten the Torx bolts to 10 Nm (7 lb.ft).
  2. Install the crossmember.

    For additional information, refer to: Transmission Support Crossmember information.

  3. Use T4 to re-calibrate a new mode sensor.
scientia non olet · About LEMON Manuals