LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2004 >> Freelander SE3 >> Repair and Diagnosis >> Engine Mechanical >> Cooling Fan >> Engine Cooling >> Removal & Installation >> Radiator >> Installation

Removal & Installation: Radiator: Installation

  1. Disconnect battery negative cable. See DISCONNECTING & CONNECTING BATTERY  in SERVICE PRECAUTIONS.
  2. Install mounting rubbers to radiator. Install upper support brackets to radiator. Position fan cowl to radiator, install and tighten bolts to specification. See TORQUE SPECIFICATIONS . Secure fan cowl to radiator with clips.
  3. Install radiator and engage lower mountings in chassis. Install radiator upper mountings to hood locking platform. Position left and right radiator baffles, secure with scrivets. Install and tighten top bolts to specification. See TORQUE SPECIFICATIONS .
  4. Connect expansion tank hose and secure with clip. Connect bottom and top hoses to radiator secure with clips. On models with A/C, install A/C condenser. See A/C CONDENSER .
  5. On models without A/C, position armature, install and tighten 4 nuts and 4 bolts securing armature to body to specification. See TORQUE SPECIFICATIONS . Align PAS fluid cooler and tighten bolts to specification. Install bumper valance.
  6. On all models, refill cooling system. See COOLING SYSTEM REFILL  in SERVICE PRECAUTIONS under DRAINING & REFILLING COOLING SYSTEM.
  7. Install and secure engine acoustic cover. See ENGINE ACOUSTIC COVER . Connect battery negative cable. See DISCONNECTING & CONNECTING BATTERY  in SERVICE PRECAUTIONS.
scientia non olet · About LEMON Manuals