LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2004 >> Freelander SE >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Removal & Installation >> Column Lock & Ignition/Starter Switch Assembly >> Installation

Column Lock & Ignition/Starter Switch Assembly: Installation

  1. On models with automatic transmission: Align key interlock cable to column lock and tighten union to 4 Nm (3 ft. lbs).
  2. Position lock to steering column assembly and fit shear bolts. DO NOT tighten shear bolts at this stage.
  3. Insert starter key, check operation of steering lock and that key turns freely.
  4. Ensure correct operation of key interlock cable.
  5. Remove starter key from column lock.
  6. Tighten shear bolts fully and shear heads off.
  7. Position ignition switch to column, fit and tighten screws.
  8. Fit passive coil.
  9. Connect multiplugs to ignition switch and passive coil.
  10. On models with automatic transmission: Ensure correct operation of microswitch.
  11. Align column cover.
  12. Fit steering column nacelle. See NACELLE - COLUMN .
  13. Connect battery earth lead.
scientia non olet · About LEMON Manuals