Bleeding Brake System: Notes
WARNING: This page is about a different car, the 2000 Land Rover Range Rover, 2000 Land Rover Discovery, 1999 Land Rover Range Rover, and 1999 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Thoroughly clean brake fluid reservoir and cap before removing cap. Ensure fluid level in master cylinder is adequate at all times during bleeding procedure. Only use DOT 4 brake fluid with a minimum boiling point of 500°F (260°C) and complying with FMVSS 116 DOT 4. DO NOT use DOT 5 silicone brake fluid.
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.