LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2003 >> Range Rover >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - Without Codes >> OBD Drive Cycle Information >> Drive Cycle C

Drive Cycle C

  1. Switch ignition on for 30 seconds.
  2. Ensure engine coolant temperature is less than 60°C (140°F).
  3. Start the engine and allow to idle for 2 minutes.
  4. Perform 2 light accelerations, i.e. 0 to 35 mph with light pedal pressure.
  5. Perform 2 medium accelerations, i.e. 0 to 45 mph with moderate pedal pressure.
  6. Perform 2 hard accelerations, i.e. 0 to 55 mph with heavy pedal pressure.
  7. Cruise at 60 mph for 8 minutes.
  8. Cruise at 50 mph for 3 minutes.
  9. Allow engine to idle for 3 minutes.
  10. Connect a generic scan tool and, with the engine still running, check for fault codes.
scientia non olet · About LEMON Manuals