LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2003 >> Range Rover >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - Without Codes >> OBD Drive Cycle Information >> Drive Cycle A

Drive Cycle A

  1. Switch on the ignition for 30 seconds.
  2. Ensure engine coolant temperature is less than 60°C (140°F).
  3. Start the engine and allow to idle for 2 minutes.
  4. Connect a generic scan tool and check for fault codes.
scientia non olet · About LEMON Manuals