Code Activation

Make sure the ignition is in position I. Press the i key on the MID panel.
Press the left side of the CODE SET key.
CODE--is displayed in the main display. Enter the code using the number keys. If the code is incorrectly input, press the left side of the CLR SET button and re-enter the code.
Press the right side of the CODE SET button to memorize the input and turn the ignition off.

Select CODE from the main menu.
Enter the code using the rotary control. Turn the rotary control until the required number appears and press to confirm. Enter the remaining numbers in the same way. If the code is incorrectly input, select CHANGE and repeat the input procedure.
Once the code is entered, it is activated by turning the ignition off.