LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2003 >> Freelander SE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Management System - Siemens >> 18.30.28 Sensor - knock (KS) >> Refit

18.30.28 Sensor - knock (KS): Refit

  1. Clean KS and mating faces on cylinder block.
  2. Position KS, ensure that harnesses are correctly routed, fit and tighten bolts to 25 Nm (18 lbf.ft).
  3. Connect KS multiplug.
  4. Fit LH inlet manifold.

    Refer to REFIT .

  5. Connect battery earth lead.
  6. If a new KS has been fitted, reset ECM adaptions using T4.
scientia non olet · About LEMON Manuals