70.50.01 Servo assembly - RHD: Refit
- Fit new gasket to servo.
- Position servo to body, fit nuts and tighten to 22 Nm (16 lbf.ft).
- Align push rod to brake pedal, fit clevis pin and secure with new spring clip.
- Fit new vacuum hose seal.
- Connect vacuum hose to servo.
- Fit brake master cylinder.
Refer to CYLINDER - MASTER - TANDEM - RHD
- Secure brake pipes in retaining clips.
- Td4 models: Fit air cleaner element.
- KV6 models:
Fit engine acoustic cover.
Refer to INSTALLATION .