LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2003 >> Freelander S >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> 70.50.01 Servo assembly - LHD >> Refit

70.50.01 Servo assembly - LHD: Refit

  1. Fit new gasket to servo.
  2. Position servo to body, fit nuts and tighten in a diagonal sequence to 22 Nm (16 lbf.ft).
  3. Align push rod to brake pedal, fit clevis pin and secure with new spring clip.
  4. Position fuel filter to support bracket and secure with screw.
  5. Td4 models:  Fit vacuum reservoir and washer to mounting bracket, tighten bolt to 10 Nm (7.5 lbf.ft).
  6. Fit new vacuum hose seal.
  7. Connect vacuum hose to servo.
  8. Fit brake master cylinder.

    Refer to CYLINDER - MASTER - TANDEM - LHD .

  9. Secure brake pipes in retaining clips.
  10. Td4 models:  Fit air cleaner element.
scientia non olet · About LEMON Manuals