LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2003 >> Freelander HSE >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Removal & Installation >> Cable - Key Interlock >> Installation

Cable - Key Interlock: Installation

  1. Position cable, align to heater and steering column bracket and secure in retaining clips.
  2. Align key interlock cable to column lock and tighten union to 4 Nm (3 ft. lbs).
  3. Fit height adjuster clamp bolt and tighten nut to 10 Nm (7.5 ft. lbs). Ensure bolt and plastic stop are correctly located in slot in column bracket.
  4. Fit height adjuster lever and tighten bolt 12 Nm (9 ft. lbs). Ensure lever is in the fully up position before tightening bolt. Hold clamp bolt nut to prevent nut rotation.
  5. Connect cable to interlock mechanism.
  6. Check key interlock cable adjustment. See CABLE - KEY INTERLOCK - ADJUST .
  7. Fit steering column nacelle. See NACELLE - COLUMN .
  8. Fit front console. See 76.25.01 CONSOLE - FRONT - UP TO 04MY .
  9. Connect battery earth lead.
scientia non olet · About LEMON Manuals