Engine Controls - Service & Adjustment Specifications (Discovery, FREELANDER & Range Rover): Capacities

NOTE: On Freelander, the Intermediate Reduction Drive (IRD) is used in place of a conventional transfer case. The IRD is attached to the automatic transmission. The IRD includes a differential unit to control the proportion of torque delivered to each front wheel. The differential operates in combination with the viscous coupling giving the vehicle a self-sensing 4-wheel system. The IRD has 4 internal seals to keep IRD fluids from mixing with gearbox lubricating fluids.

NOTE: On Discovery, the power steering system and Active Cornering Enhancement (ACE) share one fluid reservoir. The fluid reservoir has separate and independent reservoir areas for power steering system and ACE. Each system has its own filling cap. Fluid specification for both systems is Texaco Cold Climate Power Assisted Steering (PAS) fluid 14315 (GM Part No. 12345866 or 12345867). Fluid may be Amber in color.

FLUID CAPACITIES ⁽¹⁾

Application

Quantity

Auto. Transmission

Discovery ⁽²⁾

9.9 Qts. (9.4L)

Freelander ⁽³⁾

4.2 Qts. (4.0L)

Range Rover ⁽⁴⁾

10.2 Qts. (9.7L)

Cooling System (Includes Heater) ⁽⁵⁾

Discovery

12.1 Qts. (11.5L)

Freelander

8.3 Qts. (7.9L)

Range Rover

12.0 Qts. (11.4L)

Crankcase (Includes Filter)

Discovery ⁽⁶⁾

Without Oil Cooler

6.1 Qts. (5.8L)

With Oil Cooler

6.6 Qts. (6.2L)

Freelander ⁽⁷⁾

5.5 Qts. (5.2L)

Range Rover ⁽⁸⁾

6.2 Qts. (5.9L)

Differential (Synthetic 75W/90R)

Front & Rear Differentials ⁽⁹⁾

Discovery & Range Rover

1.7 Qts. (1.6L)

Rear Differential ⁽¹⁰⁾

Freelander

1.8 Qts. (1.7L)

Intermediate Reduction Drive ⁽¹¹⁾

Freelander

1.2 Qts. (1.1L)

Transfer Case

Discovery ⁽⁹⁾

2.1 Qts. (2.0L)

Range Rover ⁽⁴⁾

2.1 Qts. (2.0L)

⁽¹⁾	Fluid capacities are approximate and provided as a guide only. All fluid levels must be verified using dipstick or fluid level plugs.

⁽²⁾	Use Dexron IID or III, or equivalent.

⁽³⁾	Use Texaco N402 or equivalent.

⁽⁴⁾	Use Dexron-III or equivalent.

⁽⁵⁾	Manufacturer recommends Havoline Extended Life Coolant (XLC) or any ethylene glycol based coolant (containing no methanol) with non-phosphate corrosion inhibitors for use in aluminum engines. If using Havoline XLC coolant, DO NOT mix other coolants with Havoline XLC type coolant.

⁽⁶⁾	Manufacturer recommends 5W/30. Optional is 10W/40.

⁽⁷⁾	Manufacturer recommends 5W/40 or 5W/50.

⁽⁸⁾	Manufacturer identifies 5W/30 through 20W/50. See owners manual for temperature/viscosity recommendations.

⁽⁹⁾	Use Texaco Multigear (semi-synthetic) 75W/90R or equivalent.

⁽¹⁰⁾	Use Texaco Multigear (semi-synthetic) 80W/90 ETL 7441.

⁽¹¹⁾	Use Texaco S5 75W/90 (full-synthetic).