LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2002 >> Range Rover >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security >> Description >> Locking and Alarm Systems >> Remote Handsets >> Initialization Procedure

Initialization Procedure

  1. Ensure the vehicle is unlocked and the driver and front passenger doors are closed.
  2. Install a key/remote handset in the ignition switch, then turn the ignition switch to position I and back to position 0 in less than 5 seconds to put the BCU into the initialization mode. Continue the procedure within 30 seconds of turning the ignition switch to position 0.
  3. Remove the key/remote handset from the ignition switch.
  4. Press and hold the unlock button for a maximum of 15 seconds. During this time, momentarily press the lock button three times within 10 seconds.
  5. Release both buttons.
  6. Successful initialization is indicated by the BCU locking then unlocking the vehicle. If this does not occur, repeat step  4.
  7. Repeat steps  4 and  5 with all other remote handsets belonging to the vehicle (4 maximum). Begin the initialization of each remote handset within 30 seconds of completing the previous initialization, or the BCU will drop out of the initialization mode and the complete procedure will have to be started again.
scientia non olet · About LEMON Manuals