Programming Pre-set Radio Stations

The MFD can memorize up to 24 radio stations: 6 FM and 18 AM stations. The AM reception band is subdivided into separate MW, SW and LW memory ranges, to permit greater flexibility in storing stations. The process for tuning in and storing a radio station to a preset memory is as follows:

1. Select the waveband (FM, MW, SW and LW)
2. Select the station (search for the correct one as described)
3. Hold the desired memory key pressed in until the station is heard again after a brief interruption.

If the chosen location key is already occupied by a stored station, the station last stored is faded up briefly. If the key is released immediately, the process will be halted and the previously memorized station will not be lost. However if the key is held in the original tuned radio station will be lost and its place will be taken by the new radio station selection.

To access a preset station first ensure the waveband is correct (FM, MW, SW and LW) and then press the appropriate number key (1-6).