LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2002 >> Freelander HSE >> Repair and Diagnosis >> Electrical >> Starters >> Removal & Installation >> Starter >> Installation

Removal & Installation: Starter: Installation

  1. Clean starter motor and mating face on gearbox.
  2. Position starter motor to gearbox, align Crankshaft Position (CKP) sensor multiplug bracket. Fit and tighten bolts to specifications. See TORQUE SPECIFICATIONS  .
  3. Connect battery lead to solenoid terminal. Tighten nut to specification. See TORQUE SPECIFICATIONS  . Secure terminal cover.
  4. Connect Lucar connector to starter solenoid.
  5. Fit battery carrier.
  6. Fit battery. See BATTERY DISCONNECT/CONNECT  under SERVICE PRECAUTIONS.
scientia non olet · About LEMON Manuals