LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2002 >> Discovery Series II SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Starters) >> Removal & Installation >> Air Intake-Plenum >> Installation

Air Intake-Plenum: Installation

WARNING: This page is about a different car, the 2005 Land Rover Range Rover, 2004 Land Rover Range Rover, and 2003 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install air filter.
  2. Install plenum cover and secure with screws.
  3. Install plenum assembly and tighten nuts to specification. See TORQUE SPECIFICATIONS .
  4. Install positive cable to stud and tighten nut to specification. See TORQUE SPECIFICATIONS .
  5. Install cover.
  6. Install hood sealing rubber to air intake molding.
  7. Connect battery ground lead.
  8. Reconnect support stays and close hood.
scientia non olet · About LEMON Manuals