76.46.23.99 Fascia: Refit
- With assistance carefully fit fascia and tighten bolts securing lower edge of fascia to 26 Nm (19 lbf.ft).
- Tighten bolts securing fascia to body to 26 Nm (19 lbf.ft).
- Fit nuts securing fascia to steering column bracket to 11 Nm (8 lbf.ft).
- Secure coaxial cables to fascia and secure blue multiplug to main ICE multiplug.
- Models with A/C: Connect heater control multiplug.
- Models without A/C: Connect temperature and air distribution inner cables to heater control levers. Set temperature control knobs to fully hot, distribution knob to de-mist position and, with flap levers fully closed, secure outer cables to clips on heater casing.
- Connect multiplugs to blower motor and passenger air bag (where fitted).
- Fit glove box and secure with bolts.
- Connect fascia harness multiplugs to main harness and fuse box.
- Position instrument pack and connect multiplugs.
- Fit instrument pack to fascia and secure with screws.
- Position instrument cowl and connect multiplugs to switches.
- Fit cowl to clips on fascia and secure with screws.
- Fit fascia access panel.
Refer to PANEL - FASCIA ACCESS - DRIVER'S SIDE .
- Fit fascia lower closing panels and secure with clips.
- Fit fascia mats.
- Fit 'A' post trim panels.
- Fit center console
- For models with automatic gearbox:
Refer to CONSOLE - CENTRE - AUTOMATIC MODELS .
- For models with manual gearbox:
Refer to CONSOLE - CENTRE - MANUAL MODELS .
- For models with automatic gearbox:
- Fit steering column nacelle.
Refer to INSTALLATION .
- Fit steering wheel.
Refer to INSTALLATION .
- Fit radio cassette player.
Refer to REFIT .
- Connect battery.