Vehicle Position

If the vehicle's battery has been disconnected, or if the vehicle has been transported to a new location on another vehicle (e.g. by trailer or train), the navigation system will require up to 15 minutes to identify the new position. Entering the vehicle's position manually, reduces this delay. To enter the vehicle's position manually:

1. Highlight and select Information. 
2. From the information menu, scroll down to the next screen and highlight and select Vehicle position. 
   NOTE: If the correct CD is in the navigation computer, the country is automatically entered. If you have travelled to a new country, a new CD may be needed.
3. From the vehicle position menu, highlight and select City,  then use the typewriter menu to enter the vehicle's position (town, road, etc.) in the same way that you would enter a destination.
4. Once the town and road names are entered, the navigation computer asks for a junction. This is the name of the road that forms the next junction ahead of the vehicle.
5. Highlight and select Junction, then enter the name using the typewriter, or select the correct road name if a list of names is displayed. Crossing the junction will be highlighted. Drive the vehicle in the direction of the junction and press the rotary controller when you reach the junction.

Provided that the information entered into the computer is correct, the navigation system requires approximately 1 minute to determine the vehicle's position.