Bleeding Brake System: Notes
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1996 Land Rover Range Rover, 1996 Land Rover Discovery, 1995 Land Rover Range Rover, 1995 Land Rover Discovery, and 1995 Land Rover Defender 90. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Thoroughly clean brake fluid reservoir and cap before removing cap. Ensure fluid level in master cylinder is adequate at all times during bleeding procedure. Only use DOT 4 brake fluid with a minimum boiling point of 500°F (260°C) and complying with FMVSS 116 DOT 4. DO NOT use DOT 5 silicone brake fluid.
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.