Common Specs & Procedures
(DISCOVERY) COMMON SPECS & PROCEDURES
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | 37 Ft. Lbs. (50 N.m) | ||
| Battery | CAPACITIES | ||
| Brakes | |||
| Bleeding Sequence | |||
| With ABS | BLEEDING BRAKE SYSTEM | ||
| Without ABS | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | |||
| Service Specifications | DISC BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | N/A | ||
| Torque | N/A | ||
| Drive Belts | |||
| Adjustment | N/A | ||
| Drive Belt Routing | N/A | ||
| Engine Cooling | |||
| General Service Specifications | N/A | ||
| Radiator Cap Pressure | N/A | ||
| Thermostat R & I | N/A | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | At 2400 RPM and normal operating temperature, oil pressure should be at 20-30 psi (2.11-2.81 kg/cm2 ). | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel Aligner-To-Crankshaft bolt | 59 Ft. Lbs. (80 N.m) | ||
| Flexplate-To-Flexplate Aligner Bolt | 30 Ft. Lbs. (40 N.m) | ||
| Flywheel-To-Crankshaft Bolt | 59 Ft. Lbs. (80 N.m) | ||
| Fuel System | |||
| Pressure Specification | FUEL PRESSURE | ||
| Fuel Pressure Test Procedure | DEPRESSURIZING FUEL SYSTEM | ||
| Fuel Filter Location | FUEL FILTER | ||
| Fuel Filter R & I | FUEL FILTER | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & TIMING MARKS | ||
| Ignition Wires (Resistance) | N/A | ||
| Ignition Wires (Routing) | FIRING ORDER & TIMING MARKS | ||
| Spark Plug | SPARK PLUGS | ||
| Starting | |||
| Starter | N/A | ||
| Torque | N/A | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque Specifications | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 90-95 Ft. Lbs. (122-129 N.m) | ||