Repair Procedures: Removal
- Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ").
- Remove the rear seat.
(Refer to Body - "REAR SEAT ASSEMBLY ")
- Remove the fuel pump service cover (A).
- Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
- Disconnect the fuel feed tube quick connector (C) and the vapor tube quick-connector (D).
- Remove the fuel pump grommet (A).
- Remove the fuel pump plate cover (A) by using the SST (09310 - 2B200)
- Remove the fuel pump from the fuel tank.