DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy	Case 1	TPS adaptation condition check	Poor connection or damaged connector Faulty ETC motor Faulty TPS
	Case 2	ETC Limp Home position check
	Case 3	Lower mechanical stop adaptation voltage range check
Enable Conditions		During TPS adaptation
Threshold Value	Case 1	TPS adaptation is requested but not possible
	Case 2	Difference between throttle sensor voltage in limp home and limp home set point is higher than 0.3V
	Case 3	Difference between throttle sensor voltage in lower mechanical stop position and lower mechanical stop position set point is higher than 0.3V
Diagnostic Time		1.2s
MIL ON Condition		1 driving cycle