Removal And Installation: Installation
WARNING:
- When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
- When working on high voltage system or related components, be sure to be familiar with and comply with the "Safety Precautions, Cautions and Warnings." Failure to comply can lead serious accidents due to electric shock or short circuit. Refer to HIGH VOLTAGE SYSTEM GENERAL SAFETY INFORMATION AND CAUTION
- When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedure. Refer to HIGH VOLTAGE SHUT-OFF PROCEDURES
- Install in reverse order of removal.NOTE:
- Install the auxiliary 12 V battery and tray.
- If the auxiliary 12 V battery is dropped, it may cause internal damage. (Do not reuse)
- When installing the auxiliary 12 V battery, install the clamp correctly.
- When replacing the auxiliary 12 V battery, be sure to replace it with the same specification (Capacity, manufacturer, etc.) as the battery installed originally. When the different specification is installed, it may be determined that the battery performance is abnormal by the battery sensor.