LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Telluride EX X-Line >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> ISG (Idle Stop & Go) System >> DC/DC Converter >> Removal & Installation >> Installation

Removal & Installation: Installation

  1. Install in the reverse order of removal.
    NOTE:
    • Install the DC/DC converter with specified torque.
    • If the DC/DC converter is dropped, it may cause internal damage. (Do not reuse)
    • When the negative (-) terminal of the battery is disconnected, Idle Stop & Go (ISG) function will be disabled due to the initialization of the battery sensor.
    • To operate ISG function, connect the negative (-) terminal and wait for about 4 hours (battery to be stabilized) during IG OFF.
scientia non olet · About LEMON Manuals