LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Stinger GT-Line, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (AWD Control System) >> AWD Ecu >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the knee airbag.

    (Refer to Restraint - "KNEE AIRBAG (KAB) MODULE ")

  4. Disconnect the AWD ECU connector (A).
    G14991385Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the AWD ECU bracket nuts and then remove the AWD ECU (A).
G14991386Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals