Driver Airbag (DAB) Module & Clock Spring: Removal: Installation

WARNING: This page is about a different car, the 2024 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
When working on the high voltage system or related components, be sure to observe and be aware of the "HIGH VOLTAGE SYSTEM GENERAL SAFETY INFORMATION AND CAUTION ". If not, it may cause serious accidents due to electric shock or short circuit.
When working on the high voltage system, make sure to check the PERSONAL PROTECTIVE EQUIPMENT (PPE) and HIGH VOLTAGE SHUT-OFF PROCEDURES .

Install in reverse order of removal.
NOTE:
- When assembling the driver airbag to the wheel, make sure that the airbag wire is not caught in the wheel's internal structure.
- Assemble the airbag wire while pressing it toward the center of the driver airbag.
Check that the airbag system and horn operates normally.
NOTE: When IG is on, the airbag warning light should turn on for 3 - 6 seconds and off.