LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2022 >> Telluride S, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Propeller Shaft Assembly) >> Repair Procedures >> Inspection >> Propeller Shaft Runout

Propeller Shaft Runout

WARNING: This page is about a different variant/trim than selected.
  1. Turn the propeller shaft slowly and check the runout. Repeat this procedure for the other propeller shaft.

    Front Propeller Shaft Runout  : 0.3 mm (0.0118 in.)

    G13310707Courtesy of KIA MOTORS AMERICA, INC.
  2. Replace the propeller shaft if either of the propeller shaft run outs exceeds the specified value.
scientia non olet · About LEMON Manuals