LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2022 >> Stinger GT-Line, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Tailgate System >> Power Tailgate Module >> Repair Procedures >> Removal

Repair Procedures: Removal

CAUTION:
  1. After replacing with a new power tailgate module, check for DTC code at all times.

    If DTC code B24B0 exists, perform power tailgate mode change.

    (Refer to Power Tailgate System - "TROUBLESHOOTING ")

  2. After replacing with a new power tailgate module, perform the system initialization.

    (Refer to Power Tailgate System - "TROUBLESHOOTING ")

  3. Before delivery to customer, operate the power tailgate to be sure that there is no warning sound.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the luggage side trim [LH].

    (Refer to Body - "LUGGAGE SIDE TRIM ")

  3. Disconnect the power tailgate module connectors (A).
    G14998330Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the power tailgate module (A) after loosening the mounting nuts.
G14998331Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals