Repair Procedures: Replacement
- Remove the battery (-) terminal.
- Using a screwdriver or remover, remove the center fascia panel (A).
- Remove the audio and AVN head unit.
(Refer to Body Electrical System - "AUDIO/AVN HEAD UNIT ")
- After loosening the mounting screws, remove the A/C & heater controller unit (A).
- Disconnect the A/C & heater controller connectors (A).
- Press the lock pin to separate the connector (A) and remove the in-car sensor (B).
- To install, reverse the removal procedure.NOTE:
- Reassemble the connector correctly.
- Replace any damaged clips.