LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2022 >> Sorento Plug-In Hybrid SX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (PHEV) >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Inspection >> Component Inspection

Component Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Disconnect the Heated Oxygen Sensor (HO2S) connector.
  3. Measure resistance between the HO2S terminals.

    Front:  Pin 2 to Pin 5

    Rear:  Pin 3 to Pin 4

  4. Check that the resistance is within the specification.

    Specification:  Refer to SPECIFICATION 

scientia non olet · About LEMON Manuals