LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2022 >> K5 GT-Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Body Control Module (BCM) Diagnosis) >> DTC B1210-00: Front Left Sensor Fault >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2024 Kia K5. However, it is still accessible from the selected car via links, so may be relevant.

Inspection Procedure 

  1. Ignition "ON".
  2. Place gear lever position to "D".
  3. Using automotive stethoscope, listen to sensor operation sound.
  4. Is sensor operation sound heard?

    Good 

    • Fault might be intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and control module memory is not cleared yet. Thoroughly check terminal of battery, all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, or damage.
    • Repair or replace as necessary and then go to "VERIFICATION OF REPAIR " procedure.

    No Good 

    • Carefully re-do this troubleshooting guide steps.
    • If problem still occurs, replace PDW front left sensor and then go to "VERIFICATION OF REPAIR " procedure.
scientia non olet · About LEMON Manuals