LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Telluride EX, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Variable Force Solenoid (VFS) >> Repair Procedures >> Removal >> Variable Force Solenoid (VFS) [Bank 2/Intake]

Variable Force Solenoid (VFS) [Bank 2/Intake]

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the VFS connector (A).
  3. Remove the mounting bolts (B), and then remove the VFS from the engine.

    Variable force solenoid mounting bolt: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G13310083Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals