Repair Procedures: Removal

1. Remove the coupling assembly.

   (Refer to Coupling Assembly - "DIRECT ELECTRO HYDRAULIC ACTUATOR COUPLING ")

   NOTE:

   • Keep it level with the sticker (A) on the top of the coupling.

   Courtesy of KIA MOTORS AMERICA, INC.

2. Remove the pressure sensor (A).

Tightening torque:

10.8 - 14.7 N.m (1.1 - 1.5 kgf.m, 8.0 - 10.8 lb-ft)

Courtesy of KIA MOTORS AMERICA, INC.

Courtesy of KIA MOTORS AMERICA, INC.