LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Stinger GT2, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Idle Stop & Go (ISG) System - 3.3L >> Battery sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF.
  2. Remove the luggage covering (A).
    G13428251Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the luggage center tray (A).
    G13428252Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the battery negative (-) terminal (A).
  5. Disconnect the battery sensor connector (B).
    G13428253Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the battery sensor by loosening the mounting bolts (C).
G13428254Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals