LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Stinger GT, AWD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Front Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the front drive shaft.

    (Refer to Driveshaft Assembly - "FRONT DRIVESHAFT ")

  2. Remove the trans axle side joint.

    (Refer to Driveshaft Assembly - "JOINT ASSEMBLY (TRANSAXLE SIDE) ")

  3. Remove the dynamic damper band (A) using driver (-).
    G13424427Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: When removing the dynamic damper, lubricate the shaft with soapy water to prevent shaft damage.
  4. Remove the dynamic damper (A).
    G13424428Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals