DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	CAN signal monitoring	Poor connector connection Open or short in M-CAN high line Open or short in M-CAN low line Faulty modules that connected to M-CAN
Enable Condition	Normal battery voltage status (Battery voltage is 9 to 16V) M-CAN bus is normal
Threshold Value	M-CAN line error is detected (Short to ground or power, CAN high or low circuit mutual short)
Diagnosis Time	2s
Symptom	M-CAN communication is not possible
Erase Condition	Erase with KDS after the failure solved