SORENTO (MQ4A) Alignment Specifications (PS681)
WARNING: This page is about the Sorento Hybrid EX, which is a different variant/trim than selected.
Publication date: 2020-11-24Reference number: PS681
SORENTO (MQ4A) ALIGNMENT SPECIFICATIONS
TECHNICAL SERVICE BULLETIN
Reference Number(s): PS681, Date of Issue:
November 24, 2020
| KIA: | 2021 Sorento (MQ4a, MQ4 KH) |
| GROUP: | Chassis |
SERVICE INFORMATION
NOTE:
SERVICE MANAGERS AND TECHNICIANS:
Before any repair (including alignment) is performed, a Techline case should be opened prior to starting the repair on vehicle per EARLY WARNING REPORTING (EWR) Warranty Bulletin (WR2020-06). Failure to follow the guideline may result in a chargeback.
Before any repair (including alignment) is performed, a Techline case should be opened prior to starting the repair on vehicle per EARLY WARNING REPORTING (EWR) Warranty Bulletin (WR2020-06). Failure to follow the guideline may result in a chargeback.
This Pitstop provides information regarding alignment specifications for 2021MY Sorento (MQ4a) and Sorento Hybrid (MQ4 KH) vehicles. In the event a wheel alignment is needed, ensure your alignment equipment has the correct specifications programmed into the PC database. Any warranty claims submitted with the improper alignment specifications may be subject to chargeback. A "Before" and "After" print-out MUST be submitted with each warranty claim and MUST include the VIN, RO number, model, and model year. Sorento (MQ4a) alignment specifications are listed below and can be found on KGIS.
Ensure your equipment has the latest 2021MY alignment specifications programmed.
| Sorento (MQ4a) Alignment Specifications | |
|---|---|
| Alignment | Front |
| Individual Front Toe | 0.05° ± 0.1° |
| Total Front Toe | 0.1° ± 0.2° |
| Camber | -0.5° ± 0.5° |
| Caster | 4.23° ± 0.5° |
| King-Pin Angle | 13.8° ± 0.5° Rear |
| Individual Rear Toe | 0.1° ± 0.1° |
| Total Rear Toe | 0.2° ± 0.2° |
| Camber | -1.0° ± 0.5° |