LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> Sedona EX >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Apply soapy water on the shaft to prevent it from being damaged by the friction between the shaft spline and the dynamic damper.
  2. Install the dynamic damper.
  3. Install the dynamic damper band (A).
  4. Using the SST (09495-3K000), secure the TJ boot bands (B).

    Clearance (A):  2.0 mm (0.0787 in.) or less

    G13044677Courtesy of KIA MOTORS AMERICA, INC.
  5. Install the TJ joint assembly.

    (Refer to Driveshaft Assembly - "Repair Procedures  ")

  6. Install the front driveshaft.

    (Refer to Driveshaft Assembly - "FRONT DRIVESHAFT ")

  7. Check the front alignment.

    (Refer to Suspension System - "FRONT ALIGNMENT ")

scientia non olet · About LEMON Manuals