Spark Plug Inspection
| Inspection Procedure |
|---|
| 1. Refer to "Shop Manual" and visually and/or physically inspect following conditions; - Damaged insulation, worn electrodes, oil or fuel fouled, loose terminals and cracks. 2. Measure the electrode gap. ■Specification : Approx. 0.7 ~ 0.8 mm (0.0275 - 0.0314 in.) 3. Has any problems been found? |
Good
• Go to "Fuel System Inspection "procedure.
No Good
• Repair as necessary and go to "Verification Of Repair "procedure.